G Grizzly Backflow & Plumbing
San Manuel, AZ · 85631 Local testers · Utility reports filed

Thermal Expansion Tank Tie-In in San Manuel, AZ Near Me

Thermal expansion tank tie-in in San Manuel, AZ after a backflow preventer or check valve closes your water system. Call (833) 990-5874.

Thermal Expansion Tank Tie-In in San Manuel, AZ
Call us
(833) 990-5874
Certified testers
Reports filed with your utility
RPZ, DCVA and PVB
Price talked through by phone

Thermal Expansion Tank Tie-In in San Manuel, AZ

Install a backflow preventer on a home's main line and you have created a closed system. When the water heater runs, heated water expands and has nowhere to go. Pressure climbs until the temperature and pressure relief valve on the heater, set at 150 psi, starts to weep.

A thermal expansion tank fixes that. It is a small steel tank with an air bladder, tied into the cold supply near the heater. The bladder absorbs the expansion.

The detail people skip is the air charge. The tank has to be pre-charged to match your static water pressure, checked with a tire gauge before it goes on. A tank left at the factory 40 psi on a 70 psi system does very little.

Sizing depends on heater capacity and water pressure. A 40 or 50 gallon heater usually takes a 2 gallon tank.

Grizzly Backflow & Plumbing connects San Manuel, AZ homeowners with plumbers who tie in expansion tanks as part of backflow prevention work. Call (833) 990-5874.

How it works

Four steps to backflow testing in San Manuel, AZ

  1. 01

    Grab your notice

    Have the utility letter handy. It lists the device, serial number and due date.

  2. 02

    Talk it through

    Call (833) 990-5874. We go over the device type and the price before anything is booked.

  3. 03

    Test day

    A certified tester reads each check and the relief valve on a calibrated gauge.

  4. 04

    Report filed

    The report goes to your water utility, and you keep a copy for your records.

Coverage

Backflow Testing Services Across San Manuel, AZ

Backflow testing for the neighborhoods and ZIP codes around San Manuel, AZ.

ZIP codes we serve

85631

Backflow testing FAQs

Questions about backflow testing

Questions we hear most often about Thermal Expansion Tank Tie-In in San Manuel, AZ.

Talk to a person
How often does a backflow preventer need testing in San Manuel, AZ?
Most water utilities require a test once a year. Many also require one at installation, after any repair and after the device is moved. Your utility's notice letter gives the exact due date.
What happens if I miss the backflow test deadline?
Utilities usually send a second notice, and after that some add a fee or schedule a service shutoff. Calling (833) 990-5874 before the deadline is the simplest way to avoid it.
Do I need an expansion tank after installing a backflow preventer?
Often, yes. The device makes your plumbing a closed system, so heated water cannot expand back to the main and the water heater relief valve may start dripping.
What is a cross-connection?
Any point where drinking water piping can come into contact with a non-potable source. Common examples are a hose in a bucket, a boiler fill line and an irrigation system.
Can a backflow preventer be repaired instead of replaced?
Often it can. Rebuild kits with new discs, springs and seals are sold for most brands. Replacement makes more sense when the body is cracked or parts are no longer made.

Book a backflow test

Backflow Test Due in San Manuel, AZ? Call now.

Certified testers for backflow testing in San Manuel, AZ. Call (833) 990-5874 and we go through the device and the price before anything is booked.

(833) 990-5874
Phone · (833) 990-5874
Call (833) 990-5874 Enquire